Archive for the ‘DIY’ Category

How to Start a DIY Home Improvement Project: Tips

Wednesday, April 28th, 2010

Do it yourself projects are efficient ways to minimize cost, and to a certain degree, tap into your creative side. Home improvement is just one area in the wide and complex world of Do- it- Yourself.
In a way, home improvement should be done by the homeowners themselves, because the property is theirs, and if something succeeds or fails, the homeowners take full accountability for what happens. How does one begin a do it yourself project? The following is a step by step guide in determining your general path for future DIY projects.
1. Examine your house- a house that has stood against the elements of nature for at least three years probably has suffered some form of damage. When was the last time that you stopped to inspect whether your house is still safe to live in, or if there is something that you can still do to improve it?
A thorough evaluation of your house and all its parts would definitely give you great ideas for your future DIY project. With you some paper and a pen, list down everything that you think must be repaired, replaced, improved or taken down completely. Be critical of how furniture and electrical wires are placed in your house.
After making your list, start sifting through them. What is it that interests you at the moment? Do you wish to make a new gate made purely of wood, and coated with varnish? Do you think that old door needs sprucing up? Whatever you might choose to do, remember that you have to take into consideration time and budget constraints.
2. Plan first, and plan well- do not commit the mistake of not being able to plan before you try your hand in DIY home improvement. Any project, executed without a clear plan in mind is bound to either fail or finish unsuccessfully.
How does one begin a work plan for a DIY project? First identify what needs to be done. Make a list of the things that have to be done prior to the DIY project. Then proceed to make a list of the things that you need to do. This includes even the smallest of implements in the DIY project, like nails and paint.
After determining the materials needed for the DIY project, begin to compute how much all this would cost. A good and reliable computation should not be based on estimates alone. If you can, make the computation when you’re at the hardware store.
If something seems to be too expensive, then try to find an alternative brand, or if it’s not possible to do this, try to find an alternative, material to replace that which you cannot acquire due to cost, a good example will be thinner gauge plywood for sidings and non load bearing structures.
3. Timeframe- never forget to make a timeframe for a particular DIY project. Failure to do so might mean the project might take too long to finish, or in some instances, it might not be completed at all. A timeframe would tell you what to do and what to complete in a day.

Diy Shutters

Tuesday, April 13th, 2010

With the rise in popularity of interior window shutters there are more companies who are now offering DIY shutters. The question is whether it is really so easy to do it yourself if you want a fully professionally fitted finish, as these are not cheap products its not something you want to order and then find you are unable to fit well.For many years the only option was to order a fully fitted service, where the company you contacted would measure, supply and fit, and take full responsibility for any errors or issues with the products you received. However, as our DIY skills are growing many people are more than confident that they can do it themselves, having tackled a range of tasks in the home, and may also not want to pay the higher prices for something they view as a task they could complete themselves. With the recession tightening the strings on everyone’s purse going the DIY route also saves money, so purchasing DIY shutters is increasing significantly in popularity. Shutter companies have had to recognise this and offer not only the products, but in many cases share their knowledge to allow people to fit their products. While some still prefer to maintain that it should be the exclusive role of specialised fitters, many are happy to help customers through the entire process, providing advice and guides to make it simple. If a company is not prepared to do this then my advice is to look elsewhere, fitting DIY shutters need not be difficult and like me there are a number of companies who specialise in the DIY option.The key to a good fit is measuring. Make sure that the person who is helping and advising you has a range of fitting experience so that they will know how to fit shutters onto your type of window and be able to predict or spot any issues that might affect fitting. I offer a photo upload service so that I can see what you are dealing with and advise you as if I was in the room with you. If this stage is done properly there will be only one way everything will fit – the right way. There are also a range of shutter fitting kits, many with pre-made products so that all you need to do is assemble the frame and pop in the panels. It’s worth seeing what’s available so that you are assembling a minimal range of items and there is less room for error.Remember, you can always start small and do one window at a time so that you can start with something simple to get the hang of it.Finally make sure that the company you are dealing with are willing to provide on-going advice during the fitting process. Some are happy to sell you their products but aren’t always so keen to provide advice post sale. While there are exceptions to every rule, and some unusual windows may be a little more difficult, if a company tells you that DIY shutters are too difficult and you should have them fitted, find someone who specialises in DIY and will spend time to make it possible for you.

Diy Home Decorating Ideas: Revamp Within Your Budget

Monday, April 12th, 2010

DIY home decorating ideas abound on the television program of today, having gained in popularity over the past twenty years or so, with many of us learning new skills from leaflets freely available in all the big DIY superstores. Government legislation in the UK has precluded many DIY-ers, especially in the realms of electrical and plumbing work and, following the introduction of the HIP Packs into UK Conveyancing, where documentation has to be provided for all and any alterations to your property, DIY at its greatest popularity has slipped down a notch or two. However, even after those disastrous MDF makeover programs lost favor, people are still enthusiastic about DIY and not paying out for expensive labor costs unless it is absolutely necessary.One way that is bound to increase the value of your property is revamping your bathroom, with new bath, handbasin and toilet, together with separate shower if you have the room available. If you are on a budget, replacing taps and showerheads and putting some attractive cabinets in the bathroom will achieve a dramatic effect without too much outlay. With any DIY project, I would be inclined to go for the easiest first – take a look at whether your curtains, floors and other fabrics need to be replaced. They might be looking a little worn and, in replacing these, it may not be necessary to go to major expenses associated with a full redecoration project. Try changing your tired old carpet with more modern hardwood or laminate flooring. If your hardwood is looking tired, sanding and re-staining should give it a new lease of life and, to brighten it up further, give is a few coats of varnish. There are many other flooring options such as textured rubber, vinyl or tiles – in fact, on one of my DIY shopping trips I found the most attractive textured floor tiles which, when laid, resembled hardwood flooring so closely that I could only tell the difference when I was just a few inches away from the tiles. They weren’t especially costly – but they certainly looked it!Some people assume that decorating needs to incorporate only the most expensive looks but some of my friends’ homes actually look lived-in – they have achieved that ‘tatty’ look where everything looks almost chaos but, in fact, as one of my friends admitted, it took quite a bit of ingenuity to achieve the look without going too far. I can see her point – she has gone for stripped down doors which she bought from a junkyard, stripped bare wood shelves inset into her alcoves and the walls are all finished in an off-white Artex-type finish to give them the rustic look. Thankfully, she left the ceilings alone and did not go for the mock-antique beams. She has an old rocking chair which she bought from an antique shop and children’s toys on view on the shelves [these are for accent only]. She admitted to me that the toys are simply there as interior décor focal points and that all the children’s toys are actually put away in their own rooms upstairs. As I said, it works and, if you are careful about not over-doing the décor and going too far, the effect is fantastic. Her home is warm and friendly, spotlessly clean, but has that dog-eared tired look which you can only achieve if you work hard at it. My family room is much the same – the dogs make sure of that! No matter how many times I clear up in a day, there is always chewed-up paper and card on the floor, with a few strategic slippers, elaborately chewed, strewn about the place. Who needs interior decorators when they have dogs?Your choice of flooring is limited only by your taste and budget. Rip up the old carpet and replace it with contemporary hardwood flooring or laminate flooring. If you already have hardwood, simply sanding and re-staining it or giving it a clear finish may give your rooms the lift they need. Other flooring replacements that can transform a room include tile, vinyl, linoleum, or textured rubber.(ARA) – So many of us find ourselves in the same decorating boat – a home filled with a few family heirlooms, flea market or tag sale finds, and maybe even one or two treasures from a successful dumpster dive. You love them all, but how do you combine high and low design pieces to create a unified and polished look for your home?First says Marjorie Marcellus, an interior design instructor at The Art Institute of California – San Francisco, forget about the cost of a piece. “A successful interior is not determined by the cost of its components. For a space to work, it needs to have balance and harmony,” says Marcellus. Finishes and home furnishings should relate to each other as part of an overall design scheme, but “that doesn’t mean they have to match, be of the same era, same price or quality,” she explains.For example, says Marcellus, “I placed an expensive slab of marble onto a salvage-yard industrial black metal stand and then added four black bargain stools from Pottery Barn.” The similar finishes of the materials made it work. The result? “A custom kitchen table for my client’s urban loft. Topped with a delicate antique vase, fresh wild flowers and colorful cloth napkins from IKEA, the outcome was unexpected and delightful,” says Marcellus.Suzanne Wilkins, an interior design instructor at The Art Institute of New York City, is another proponent of mixing both high and low design elements. A basic rule of thumb, says Wilkins, is to avoid having a less expensive item next to a more expensive similar item.”Too many similarities invite comparison, and may make the less expensive things look cheap,” she says. Instead, pair precious things with inexpensive finds by following two rules of thumb: keep it simple and clean lined, or keep it funky. According to Wilkins, simple clean lines naturally look expensive, and we associate clean lines with a more modern and expensive look.On the other hand, she says, funky items can often stand alone and speak for themselves. But use them sparingly. For example, a nice grouping of African masks can add a lot of texture and color and can be found inexpensively in flea markets. To make it work, don’t use more than three or four or in more than one location, says Wilkins.Dan Noyes, chairman of the Interior Design department at The Art Institutes International, Minnesota, loves to combine modern pieces with weathered antiques, “to create a wonderful gypsy chic look.” Whether high end or low end, an antique’s patina and unique character flaws can set it apart from a great, modern piece of furniture, he says.Furniture pieces themselves can combine the best of both high and low end design features says John Gambell, chairman of the Interior Design department of The Art Institute of New England. For a stylish-looking dining or end table, Gambell suggests taking a simple and inexpensive parsons-styled table (Ikea is a good source) and add a made-to-order stone top of either slate or marble. ” A small ‘reveal’ between the base and the top wood appear to make the top float,” says Gambell.A few final words of wisdom about mixing high and low end design from the experts: When shopping at stores like Crate and Barrel or Pottery Barn, pick a few pieces from each instead of outfitting an entire room with one look. “Mix it up,” says Wilkins. And remember, be patient and shop around. What makes a room look rich and expensive, no matter what the budget, is time.Home Decorating Ideas offers quick cheap tips on how to decorate your house. Includes tips on decorating the office, living room, bedroom, kitchen and more.